1. Sizes Available
   1. 1 - 1/2" pitch
   2. 2 - 1/2" pitch
   3. 4" pitch
   4. 6" pitch
   5. 9" pitch

2. Typical Applications
   1. Machine tool chip removal
      1. wet or dry operation
      2. heat range
         1. 600°F without heat bars
         2. 1500° - 1700°F with heat bars
   2. Whole plant chip and scrap removal systems
   3. Die casting operation
   4. Parts handling
   5. Packaging operation
   6. Weighing operation
   7. Inspection
   8. Stamping operation
   9. Dual compartment belt for parts and scrap handling at same time

3. Advantages
   1. Patented side wing design
   2. Ease in maintenance
   3. Conveyor configured to customer's needs
   4. Wet or dry operation
   5. Integral or separate tank for coolant handling available
   6. Flexibility of design for proper fit and application

4. Items not suitable for handling
   1. Sand and gravel
   2. Concentrated loads of glass
   3. Tumbling media
   4. Wet cast iron chips and fines
   5. Sludge

Drag Flight Conveyors

1. Sizes available
   1. #DS-241-SB roller chain
   2. #55, #188 combination chain
   3. #348, #458 drop forged chain

2. Typical applications
   1. Machining operation
      1. cast iron chips and fines, wet or dry
      2. broaching chips
   2. Grinding operation
   3. Filtration systems
   4. Scale removal
   5. Any operation producing sludge or paste consistency material for removal

3. Advantages
   1. Flexible design
      1. tanks integral
      2. tanks separate available
      3. wide range of chains available from double strand to single strand
   2. Ease of maintenance
   3. Clean lines

4. Items not suitable for handling
   1. Turnings, long stringly and curly material
   2. Large parts and chips
   3. Aluminum chips, with large quantities of coolant, chip would float and stay inert in coolant

Magnetic Conveyors

1. Typical applications
   1. Machining operation - ferrous materials only
      1. broken chips
      2. fine particles
   2. Conveying parts, small (samples required)
      1. washers
      2. cotter pins
      3. nails
      4. screws
      5. rivets
      6. fasteners
      7. stampings
      8. chain parts
   3. Broaching
   4. Large volume of coolant involved in machining
   5. Parts cleaning operation, degreasing, etc.

2. Advantages
   1. Submerged in tanks -- oil and water tight construction
   2. Wet or dry operation at steep inclines
   3. Casing material impervious to most solvents
   4. Permanent magnets used
   5. No moving parts -- external safety
   6. Virtually maintenance free

3. Items not suitable for handling
   1. Long stringly curls, longer than 12"
   2. "Steel-wool" type chips
   3. Non-ferrous materials
   4. Large parts

Filterveyor

1. Size
   1. Filterveyor system to be sized per the requirements of the machine
   2. Dimensional characteristics of machine, coolant flow rates, material being machined, nature of chips, chip volume, etc. will determine sizing of Filterveyor
2. Typical applications
   1. Machining material can be aluminum, steel, brass, etc.
   2. Where machine produces a variety of chip types from long stringers, tight bushy balls of stringy chips, loose balls of stringy chips and curls, fine granular chips and fine dust or sludge. Filterveyor is unique in that it will separate all of these chip types from the coolant.
   3. Where large volumes of coolant are present in the machining application
   4. Where high pressure coolant is employed for through the tool or through the spindle coolant.

3. Advantages
   1. Less maintenance time cleaning machine sump
   2. Longer tool life
   3. More precise machining
   4. Fewer breakdowns/less downtime
   5. Extended coolant life

4. Items not suitable for handling
   1. Cast Iron